MOLY-EASE NON-MELT LUBRICANT
· CONSTRUCTION EQUIPMENT
· STEEL MILLS · FARM EQUIPMENT
· INDUSTRIAL PLANTS · COTTON GINS · OIL FIELD EQUIPMENT · BOTTLING PLANTS · PAPER MILLS · AUTOMOTIVE INDUSTRY · ASPHALT PLANTS · MARINE INDUSTRY · TRUCKING INDUSTRY
MOLY-EASE is a non-melt grey colored lubricant containing molybdenum disulfide. This product is fortified to provide anti-wear and low friction performance through a wide temperature range. The molybdenum disulfide contained in MOLY-EASE reduces friction and protects against excessive wear from extreme loads, galling and seizing. The moly “plates out” on metal surfaces, imparting extra protection to the parts and extending the lubrication cycle. MOLY-EASE is exceptionally resistant to most acids, salt spray, stream, dirt, dust, water, oxidation, and weather. Our product has excellent adhesive and cohesive properties, as well as high shock protection. MOLY-EASE protects equipment indoors or outdoors, even under high temperatures and heavy loads and is effective up to 2500 RPM’s.
|
PROPERTY | METHOD | TEST RESULTS |
|
NLGI GRADE | ASTM D 217 | 2 |
| THICKENER TYPE | - | CALCIUM SULFONATE COMPLEX |
| COLOR | VISUAL | GREY |
| BASE OIL VISCOSITY cSt @ 40°C | ASTM D 445 | 460 |
| DROPPING POINT,°F | ASTM D 2265 | 600°F + |
| WORKED PENETRATION AT 25° C>/td> | ASTM D 217 | 285 |
| CHANGE AFTER 100,000 STROKES | ASTM D 217 | +20 |
| OIL SPERATION, 25° C, 24 HOURS, % | ASTM D 1742 | 0% |
| FOUR BALL WELD, LOAD, KG | ATM D 2783 | 800 |
| TIMKEN OK LOAD, Lbs | ASTM D 2509 | 70
|
|
WEAR SCAR DIA, mm, | ASTM D 2266 | .40 |
| WATER WASHOUT, wt % lose @ 175° F | ASTM D 1264 | 1 MAX |
| WATER SPRAY OFF, %, | ASTM D 4049 | 6.5 MAX |
| WHEEL BEARING LEAKAGE, GM | ASTM D 1263 | 0.38 |
| RUST TEST, RATING | ASTM D 1763 | PASS |
| OXIDATION STABILITY, PSI drop 100 HRS | ASTM D 942 | 1.5 |